How to install hardwood floor on stairs videos
We started around 9: Removing the tack strips and staples was a lot less fun, but it moved relatively quickly.
That part wasn't bad. Removing the tack strips and staples was a lot less fun, but it moved relatively quickly.
Next up was a whole lot of staining. You can check out all of the stair tread colors and species here.
So, after custom mixing a stain to match our laminate floors, we stained, and stained, and stained. Fortunately, we only had to apply one coat of stain.
It dried quickly and we were able to put a coat of water-based polyurethane on before we went to bed that same night. We also painted the stair risers. They come primed, which is awesome!
We opted for black stair risers, which required a couple of coats for good coverage, but it moved really quickly. It really could not be more simple. Then you position it on the NuStair tread, make your marks and your cuts and install it. The NuScribe looks like this:.
And here is a fun animated image so you can see our progress, step-by-step! We completed the entire installation in 1 day!
We started around 9: Not bad at all. After the stairs were installed, we had a small amount of touch up painting and caulking to do.
How to Install Wood Stairs
I'll give you a hint—we added a gallery wall and a little detail to the stair risers: I was not financially compensated for this post. Now we have stairs we love!
Do you want to get started creating a home you love? Click below for my guide to get started! Repeat the process with each step.
Use a rubber mallet to position the stairs in their exact spot, making sure the stair is plumb and even with a box level Image 1using shims where necessary Image 2. After all the stairs are in place, wait for the glue to dry and lightly sands and cleans the stairs with a broom and a shop vac. Finally apply a stain and polyurethane finish.
How to Install Hardwood Stairs
Repeat the Gluing Process Repeat the process with each step. Finish the Stairs After all the stairs are in place, wait for the glue to dry and lightly sands and cleans the stairs with a broom and a shop vac. How to Build Exterior Stairs 10 Steps.
How to Install Trapdoor Stairs 5 Steps.